Reverse аction tweezers for nail art EXPERT 31 TYPE 2
Key Features:
- Professional-grade tool, designed for frequent salon use.
- Durable construction, resistant to mechanical stress.
- Made from high-quality medical stainless steel.
- Sterilizable & disinfectable for hygienic application.
Professional Features & Benefits
- Expert-level precision tool for correcting the lower arch shape into a C-curve.
- Used at key polymerization stages—first applied at the second minute of curing the initial layer, then again after curing the second layer while the material cools.
- Ideal for upper tip modeling, helping secure nail tips during curing.
In order for extended nails to retain their appearance and feel natural for a long time, it is important to create an anatomically correct apex. To do this, in the process of modeling, the arch is pressed using a special tool.
Reverse tweezers for arch clamping Expert 31 Type 2 is a professional gadget with which the arch acquires a C-shape on the lower types. It is put on an artificial nail in the second minute of polymerization of the first layer. Then - after polymerization of the second layer, while the material cools. The device is also relevant for modeling with upper tips, as it helps to fix the tips during polymerization.
Features of the Expert 31 Type 2 tweezers:
- belongs to the professional series;
- differs in resistance to mechanical stress;
- designed for frequent use;
- made of the highest quality medical steel;
- subject to disinfection and sterilization.
How to use Expert 31 Type 2 tweezers:
- Carry out standard nail preparation before extensions, preferably making maceration impossible with water.
- Degrease the nail plate using a special tool for this.
- Use an acid primer for gel systems, avoiding its contact with the cuticle area and lateral rollers to further prevent peeling of the artificial material. Let dry for 30 seconds.
- Prime the nail plate with a base and dry in a UV/LED lamp for 30-60 seconds. Trim and place the mold under the nail.
- Put a layer of gel on the mold and form a nail plate. Polymerize for 60 seconds in a UV/LED lamp. Then you need to tuck the arch and repeat the drying cycle in the lamp.
- Lay out a second layer of gel and polymerize in a lamp. Then, by analogy with the first layer, press the arch and, in the fixed position, let the material cool for 3-4 minutes.
- Treat the modeled nail from the outside and inside with Nail Prep and shape it into the desired shape with a file if necessary.
- Thoroughly remove residual dust after sawing with a fresher and lint-free cloth.
- Cover the nail plate with a topcoat and dry for 60-90 seconds in a UV/LED lamp.OR
- Apply colored gel polish in several layers, drying each in a lamp. Then cover with a layer of top coat for gel polishes.
Remove the remaining sticky layer with a cleaner.
Treat the periungual area with cuticle oil to moisturize it.
The Expert 31 Type 2 arch clamp tweezers are professional quality, durability and comfort in operation.
